Skip to main content

Filter By:

Safety

Mirrycle Mirrycle Mirror
$18.99
The Mirrycle mounts in minutes with the wrench that is included. The mirror is a 3" round, convex glass mirror with a wide field of view. The mirror is adjustable to any viewing angle. - Fits inside handlebars with 13.75mm – 22.5mm (.54" to .875") inside diameter
Bike Peddler Take a Look Eyeglass Mirror
$14.99
- Made in the USA - Wide field of view with three pivot points for total adjustability - Lightweight and optically correct - Fits helmet visors and eyeglasses; will fit helmets with adapter
Sprintech Drop Bar Rearview Mirror
$22.99 - $34.99
Retro Mirror Sprintech Single Mirror. Works with all road handlebars by attaching to the bar end using its simple retrobike install. Allows you to see traffic from behind without having to look over your shoulder. Expands your visual field without shifting head or body to see behind you. As reliable as a car's rearview mirror! Placed on the left side of the handlebars, the Sprintech rearview mirror is easy to install. Simply remove the cap from the end of the handlebar, insert the connector plug, and attach the Sprintech rearview mirror. Once installed, simply adjust to the desired position. Available in five colors: Black, White, Red, Yellow, and Blue. Also available in pairs!
Mirrycle Incredibell Adjustabell 2
$7.99
Mirrycle's Incredibell Adjustabell 2 uses a fully adjustable handlebar clamp that fits any size bars. Its perfect size and pivoting ringer let you mount it just about anywhere on your handlebars, and allows you to ring it with your thumb or finger. The Adjustabell 2 can even be mounted to a ski pole or walking stick. One flick and it rings loud and clear for all to hear. - Weight: 26g (.9oz) - Dome Diameter: 34mm (1.34") - Fits handlebars with 15mm – 39mm (.59"- 1.54") outside diameters
Knog Oi Bell - Large
$19.99
Bike bells generally look & sound a bit ugly. But why? What if they looked sexy & sounded like an angel playing a glockenspiel? A bell with a beautiful tone, but also a remarkable style and choice of materials that embodies a rider’s personality. The Large Oi fits 23.8 to 31.8mm bars e.g. drop bar road bikes and some cruiser / commuters. Please make sure you know where on your handlebar you are going to place the bell (grips or stem) before you order as you may need a different sized bell. THE LOOK Where bells usually protrude up or out, Oi doesn’t. It appears to hover around the handle bars. In one sense, it's discreet. But in another, it stands out as unrecognizable. THE SOUND Knog tested numerous prototypes to get the perfect pitch, length of ring, and volume. With a spring-loaded actuator built into the mount, the strike of the bell is firm and fast, allowing a good balance of volume and longevity of sound. It actually has several pitch tones - one core and several supportive higher tones to ensure it's unmistakable and safely heard. To compare it to a musical instrument, where some bells play a single note, Oi plays a chord. THE MOUNT What about the handle-bar cables? No worries. Built into the shape of the mount is a cable management system. So not only does it allow the bell to look and sound uninterrupted, it also helps gather your cables (for the organizer inside us all). What about getting it on the bar. Again, not a thing. Just pop it over, give the hex screw a quick tighten up, and you're good to go. No sliding down the handlebars, no dismantling and re-assembling.
Timber Timber 3.0 Bolt-On
$24.95
Timber 3.0 is a solid brass bell with a sleek black finish and a crisp, clean sound. If you find yourself using your bell on nearly every ride, then the Bolt-On model is the one for you. The Timber 3.0 Bolt-On is identical to the original model, except it features a tight, durable mount that won't spin, shake or rattle on your bars. Similar to a GPS or Garmin mount, the flexible nylon band tightens to your bars with a 5mm hex bolt. The band itself is 31.8mm diameter, the same as the wider part of your bars near the stem. It also includes a flexible 22.2mm shim for mounting your bell securely near your grips, closer to your hands (you'll want to use this setup for oversize and DH bars). - Installation is easy. There is no need to remove the grips, brakes, etc. Just flex the clamp open and slide onto your bar. - Upgraded version has a slimmer profile on your handlebars, smoother shifting between ring modes, and we've beefed up the strength of the internal clapper cable and the lever handle for longer life.
Bike Peddler Take a Look Helmet Adapter
$4.99
- Made in the USA - Enables Take a Look Original Eyeglass Mirror to fit helmets - Does not work with Take a Look Compact Eyeglass Mirror
Mirrycle LTD Mirrycle Mirror (Bontrager Isozone)
$22.99
The LTD Mirrycle Mirror quickly attaches to Bontrager Isozone handlebars using the supplied wrench. It has a convex mirror for a wide field of view to help you clearly see approaching traffic. And the mirror easily adjusts to your optimum viewing angle.
Page 1 of 1